- Computer interface: USB V1.1 Plug and Play

- Operational system virtual serial port driver

- Operational system virtual serial port driver: Windows®, MAC and Linux

- Field Interfaces: RS485 Half Duplex (dual buses), RS485 Full Duplex or RS422

- Jumper selected RS485 / RS422

- Automatic flow control for RS485 Half Duplex 120 Ohms internal resistors termination enabled by jumpers

- Transmission rate: from 300 bps to 250 kbps

- MaximumRS485/RS422 cable length: 1200 m

- Maximum number of devices in the RS485 network

- Half Duplex: 2 x 32 devices

- Full Duplex: 32 devices

- Data transmission and reception LED indicators

- Power: from the USB port

- Consumption: <100 mA

- Isolation: 1500 Vdc galvanic isolation between the USB interface and the RS485/RS422 interfaceRS485/422 bus protection: ±60 Vdc, 15 kV ESD

- USB connection: Mini-B connector A 1.5 m cable with plugs mini-B and A is provided with the module

RS485/422 connector: screw terminal type accepting 1.5 mm² (16 AWG) wires ABS enclosure: 70 x 60 x 18 mm

- Operating environment: 0 to 70°C, 10 to 90% relative humidity, non-condensing